syncMgr.Block() will lock the segment when executing compaction.
Previous implementation was unable to Unblock thoese segments when
compaction failed. If next compaction of the same segments arrives,
it'll stuck forever and block all later compation tasks.
This PR makes sure compaction executor would Unblock these segments
after a failure compaction.
Apart form that, this PR also refines some logs and clean some codes of
compaction, compactor:
1. Log segment count instead of segmentIDs to avoid logging too many
segments
2. Flush RPC returns L1 segments only, skip L0 and L2
3. CompactionType is checked in `Compaction`, no need to check again
inside compactor
4. Use ligter method to replace `getSegmentMeta`
5. Log information for L0 compaction when encounters an error
See also: #30213
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
issue: #29988
This pr adds full-support for wildcard pattern matching from end to end.
Before this pr, the users can only use prefix match in their expression,
for example, "like 'prefix%'". With this pr, more flexible syntax can be
combined.
To do so, this pr makes these changes:
- 1. support regex query both on index and raw data;
- 2. translate the pattern matching to regex query, so that it can be
handled by the regex query logic;
- 3. loose the limit of the expression parsing, which allows general
pattern matching syntax;
With the support of regex query in segcore backend, we can also add
mysql-like `REGEXP` syntax later easily.
---------
Signed-off-by: longjiquan <jiquan.long@zilliz.com>
See also #27606
Previously l0 linear compaction will scan all target segment id from
metacache for each line of delta entry, which is not needed since
compaction target segments shall be all immutable.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #30404
`PrimaryKey` is used to hold pk values for both int64 & varchar data
type. Since it is an interface it may occupies more memory than pure
slices when holding a group of pks.
This PR add `PrimaryKeys` interface when some other module need to hold
lots of PrimaryKeys.
By using this interface, it could reduce the memory of pk slice to half
when using Int64 Pk data type and reduce interface cost for each row of
varchar as well.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
This PR introduces novel importv2 roles for datanode:
1. Executor: To execute tasks, a import task will be divided into the
following steps: read data -> hash data -> sync data;
2. Manager: To manage all the tasks;
issue: https://github.com/milvus-io/milvus/issues/28521
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
See also #27675
This PR adds back MemoryHighSyncPolicy implementation. Also change
MinSegmentSize & CheckInterval to configurable param item.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #27675
BloomFilterSet.current shall be reset after RollStats, otherwise it will
keep tracking whole segment data causing the false positive ratio larger
than expected.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #28521#29732
include
1. list collection's import jobs
2. create a new import job
3. get the progress of an import job
fix:
1. mix the order of dbName & collectionName #29728
2. trace log keep the same as v1
3. support traceID
4. azure precheck, blob name cannot end with / #29703
---------
Signed-off-by: PowderLi <min.li@zilliz.com>
the proxy miss-returned nil while failed to listen the port, then the
server continues to run but we can't connect to service
resolve#30034
Signed-off-by: yah01 <yah2er0ne@outlook.com>
according to our benchmark, concurrency level 16 is enough to fully
utilize the object storage network bandwidth
Signed-off-by: yah01 <yang.cen@zilliz.com>
issue: #29772
1. `DropPartition` only invalidates the cache related to the partition.
2. `CreateAlias` does not invalidate the cache.
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
See also #30167
After support open telemetry tracing, we want to have traceID as well,
this PR adds util functions to set traceID with span & propagate traceID
between different context.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #27606
`MultiRead` actually download file in sequence, which may lead to large
time consumption during l0 compaction download phase.
This PR make l0 compactor download deltalogs in parallel utilizing conc
package & io pool.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #25639
/kind improvement
When the number of vector columns increases, the number of rows per
segment will decrease. In order to reduce the impact on vector indexing
performance, it is necessary to increase the segment max limit.
If a collection has multiple vector fields with memory and disk indices
on different vector fields, the size limit after segment compaction is
the minimum of segment.maxSize and segment.diskSegmentMaxSize.
Signed-off-by: xige-16 <xi.ge@zilliz.com>
---------
Signed-off-by: xige-16 <xi.ge@zilliz.com>
issue: #30102#30225
we should read MetricType from SearchResult,
because query node never
1. read metricType from LoadMeta
2. store to collection
3. set SearchRequest.MetricType
Signed-off-by: PowderLi <min.li@zilliz.com>
issue: #29772
The shardLeaders cache does not actively expire, update the cache when
search/query fails.
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
After #28873, PartitionID and CollectionID should be filled in
CompactionSegmentBinlog so that DataNode can compose
the correct logPath. However There're some places left forgotten to fill
in the information, causing Datanode downloading `xxx/0/0/xxxx/xxxx`
binlogs during compaction
See also: #30213
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
See also #30273
This PR:
- Rename confusing `LoadIndexInfo` to `UpdateIndexInfo` for LocalSegment
- Use `DynamicPool` instead of `LoadPool` for `UpdateSealedSegmentIndex`
- Fix cgo call missing pool control
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Allows proactive warming up of chunk cache. Original vector data will be
asynchronously loaded into the chunk cache during the load process. It
has the potential to significantly reduce query/search latency for a
certain duration after the load, albeit with a concurrent increase in
disk usage.
issue: https://github.com/milvus-io/milvus/issues/30181
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
before this, every time writting the index chunk data into the disk,
there are 4 I/O operations:
- open the file
- seek to the offset
- write the data
- close the file
this optimized this to open only once and continiously write all data.
This also makes it concurrent to load the files from object storage
Signed-off-by: yah01 <yang.cen@zilliz.com>
See also #30250
This PR add requery flag in query task. When reQuery flag is true, query
task shall skip partition name conversion and use pre-calculated
partitionIDs passed from search task.
TODO: hybrid search does not have partition id information. we shall
apply same logic for hybrid search later.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #30111
Segments could be "Flushed" only by `FlushSegments` grpc call from
datacoord by design. There are two possible reason to cause one segment
got flushed multiple times.
- Segment is in flushing state during multiple epoch in flowgraph
- Segment is flushed by flushTs & Flush segments
So this pr fix:
- Remove state change logic form FlushTs policy
- Change Flush segment into three stage way: Sealed->Flushing->Flushed
preventing multiple Flushed=true operations.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
