When there're a lot of loaded collections, they would occupy the target
observer scheduler’s pool. This prevents loading collections from
updating the current target in time, slowing down the load process.
This PR adds a separate target dispatcher for loading collections.
issue: https://github.com/milvus-io/milvus/issues/37166
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
When check health logic failed to collection not-queryable, the related
reason is hard to find in log.
This PR add context for log with trace id and print unqueryable
collection info log.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #36977
with node_label_filter on resource group, user can add label on
querynode with env `MILVUS_COMPONENT_LABEL`, then resource group will
prefer to accept node which match it's node_label_filter.
then querynode's can't be group by labels, and put querynodes with same
label to same resource groups.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #36970
cause release segment and balance channel may happen at same time, and
before new delegator become serviceable, if release segment exeuctes on
new delegator, and search/query comes on old delegator, then release
segment and query segment happens in parallel, if release segment
execute first in worker, then search/query will got a SegmentNodeLoaded
error.
This PR add serviceable filter on delegator, then all load/release
segment operation will happens on serviceable delegator.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #37205
Previously releasing growing segments could be triggered by two
conditions:
- Sealed Segment with same id is loaded
- Segment start position is before target checkpoint ts
Which has a worst case that the corresponding sealed segment is
compacted and the checkpoint is pinned by a growing l0 segment.
This PR introduces a new rule that: a growing segment could be released
if the segment id appeared in current target dropped segment id list.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #36621
1. Add API to access task runtime metrics, including:
- build index task
- compaction task
- import task
- balance (including load/release of segments/channels and some leader
tasks on querycoord)
- sync task
2. Add a debug model to the webpage by using debug=true or debug=false
in the URL query parameters to enable or disable debug mode.
Signed-off-by: jaime <yun.zhang@zilliz.com>
issue: #37054
after querycoord restart, segment_checker may release segment by mistake
due to next target isn't ready yet.
This PR requires release segment must happens after next target is
ready.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Relatedt #36887
DirectFoward streaming delete will cause memory usage explode if the
segments number was large. This PR add batching delete API and using it
for direct forward implementation.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #33550
cause wrong impl of UpdateCollectionNextTarget, if ReleaseCollection and
UpdateCollectionNextTarget happens at same time, the the released
partition's segment list may be add to target again, and delegator will
be marked as unserviceable due to lack of segment.
This PR fix the impl of UpdateCollectionNextTarget
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #36464
This PR enable balance on querynode with different mem capacity, for
query node which has more mem capactity will be assigned more records,
and query node with the largest difference between assignedScore and
currentScore will have a higher priority to carry the new segment.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #36488
when call TransferChannel/TransferSegment, querycoord will generate and
submit balance task to scheduler, if segment/channel's task already
exist in scheduler, submit task will failed.
to make TransferChannel/TransferSegment idempotent, we should skip to
submit if task already exist in scheduler.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #36536
query coord use `segmentTaskDeleta/channelTaskDelta` to measure the
executing workload for querynode in scheduler, and we maintains the
`segmentTaskDeleta/channelTaskDelta` by `scheulder.Add(task)` and
`scheduler.remove(task)`, but `scheduler.remove(task)` has been called
in unexpected way, which cause a wrong
`segmentTaskDeleta/channelTaskDelta` value and affect the segment assign
logic, causes segment unbalance.
This PR moves to compute the `segmentTaskDeleta/channelTaskDelta` when
access, to avoid the wrong value affect.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #35821
After collection loaded, if we need to increase/decrease collection's
replica, we need to release and load it again.
milvus offers 4 solution to update loaded collection's replica, this PR
aims to dynamic change the replica number without release, and after
replica number changed, milvus will execute load replica or release
replica in async, and the replica loaded status can be checked by
getReplicas API.
Notice that if set too much replicas than querynode can afford，the new
replica won't be loaded successfully until enough querynode joins.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #36426
the old constriant requires only segment on current target can be
balanced, which is wrong, and caused that segment can't be move out from
stopping node, if it's only exist in next target.
by design, stopping balance need to move out all segment on it by
balance task, thus the unfair old constriant should be removed.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #36201
after querynode has been remove from replica, all dirty segment/channel
on it should be released.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #36064
when delegator has high memory usage, load l0 segment will failed. and
balance segment task will blocked by load segment task, then delegator
cann't free memory by moving out some segment, causes a logic dead lock.
this PR remove the limit for balance, we permit segment and balance
execute in parallel. which won't cause side effect due to:
1. one segment can only has one task in qc's scheduler, and load/release
task will replace balance task if necessary
2. balance speed has been limited, and it won't block load segment task.
3. if collection has load task and balance task at same time, load task
will be scheduled first due to high proirity.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #33550
cause concurrent issue may occur between remove parition in target
manager and sync segment list to delegator. when it happens, some
segment may be released in delegator, and those segment may also be
synced to delegator, which cause delegator become unserviceable due to
lack of necessary segments, then search/query fails.
this PR make sure that all write access to target_manager will be
executed in serial to avoid the concurrent issues.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #35846
querycoord will notify proxy to update shard leader cache after
delegator location changes, but during querynode's failure recovery,
some delegator may become unserviceable due to lacking of segments, and
back to serviceable after segment loaded, so we also need to notify
proxy to invalidate shard leader cache when delegator serviceable state
changes.
This PR will maintain querynode's serviceable state during heartbeat,
and notify proxy to invalidate shard leader cache if serviceable state
changes.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Related to #35415
This PR make querycoord report error when load request tries to update
load fields list, which is currently not supported.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #33744
This PR includes the following changes:
1. Added a new task type to the task scheduler in datacoord: stats task,
which sorts segments by primary key.
2. Implemented segment sorting in indexnode.
3. Added a new field `FieldStatsLog` to SegmentInfo to store token index
information.
---------
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
issue: #34985#35493
after querynode has been suspended, it's not allow to load
segment/channel on it, which means the node is read only. to be
compatible with resource group design, after query node has been
suspend, we remove it from it's original resource group, make it a read
only query node in replica. then two things will happens:
1. it's original resource group will be lacking of query nodes, query
coord will assign new node to it.
2. querycoord will try to move out all segments/channels after querynode
has been suspended
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #35170
This PR enable to set load configs in cluster level, such as replicas
and resource groups. then when load collections will use the load
config.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
before querycoord stop gracefully, we will save the current target to
meta store and recover it after querycoord start up, to speed the
querycoord's recovery time. but the target version hasn't been recovered
as expected, and it use latest timestamp as current target's version,
which has no effect to querycoord but an unnecessary syncTargetVersion
func call.
This PR recover the correct target version to avoid unnecessary
syncTargetVersion func call
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #35087
after qc restarts, and target is not ready yet, if dist_handler try to
update segment dist, it will set legacy level to l0 segment, which may
cause l0 segment be moved to other node, cause search/query failed.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
