issue: #46540
Empty timetick is just used to sync up the time clock between different
component in milvus. So empty timetick can be ignored if we achieve the
lsn/mvcc semantic for timetick. Currently, some components need the
empty timetick to trigger some operation, such as flush/tsafe. So we
only slow down the empty time tick for 5 seconds.
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: with LSN/MVCC semantics consumers only need (a) the
first timetick that advances the latest-required-MVCC to unblock
MVCC-dependent waits and (b) occasional periodic timeticks (~≤5s) for
clock synchronization—therefore frequent non-persisted empty timeticks
can be suppressed without breaking MVCC correctness.
- Logic removed/simplified: per-message dispatch/consumption of frequent
non-persisted empty timeticks is suppressed — an MVCC-aware filter
emptyTimeTickSlowdowner (internal/util/pipeline/consuming_slowdown.go)
short-circuits frequent empty timeticks in the stream pipeline
(internal/util/pipeline/stream_pipeline.go), and the WAL flusher
rate-limits non-persisted timetick dispatch to one emission per ~5s
(internal/streamingnode/server/flusher/flusherimpl/wal_flusher.go); the
delegator exposes GetLatestRequiredMVCCTimeTick to drive the filter
(internal/querynodev2/delegator/delegator.go).
- Why this does NOT introduce data loss or regressions: the slowdowner
always refreshes latestRequiredMVCCTimeTick via
GetLatestRequiredMVCCTimeTick and (1) never filters timeticks <
latestRequiredMVCCTimeTick (so existing tsafe/flush waits stay
unblocked) and (2) always lets the first timetick ≥
latestRequiredMVCCTimeTick pass to notify pending MVCC waits;
separately, WAL flusher suppression applies only to non-persisted
timeticks and still emits when the 5s threshold elapses, preserving
periodic clock-sync messages used by flush/tsafe.
- Enhancement summary (where it takes effect): adds
GetLatestRequiredMVCCTimeTick on ShardDelegator and
LastestMVCCTimeTickGetter, wires emptyTimeTickSlowdowner into
NewPipelineWithStream (internal/util/pipeline), and adds WAL flusher
rate-limiting + metrics
(internal/streamingnode/server/flusher/flusherimpl/wal_flusher.go,
pkg/metrics) to reduce CPU/dispatch overhead while keeping MVCC
correctness and periodic synchronization.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: chyezh <chyezh@outlook.com>
Add support for DataNode compaction using file resources in ref mode.
SortCompation and StatsJobs will build text indexes, which may use file
resources.
relate: https://github.com/milvus-io/milvus/issues/43687
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: file resources (analyzer binaries/metadata) are only
fetched, downloaded and used when the node is configured in Ref mode
(fileresource.IsRefMode via CommonCfg.QNFileResourceMode /
DNFileResourceMode); Sync now carries a version and managers track
per-resource versions/resource IDs so newer resource sets win and older
entries are pruned (RefManager/SynchManager resource maps).
- Logic removed / simplified: component-specific FileResourceMode flags
and an indirection through a long-lived BinlogIO wrapper were
consolidated — file-resource mode moved to CommonCfg, Sync/Download APIs
became version- and context-aware, and compaction/index tasks accept a
ChunkManager directly (binlog IO wrapper creation inlined). This
eliminates duplicated config checks and wrapper indirection while
preserving the same chunk/IO semantics.
- Why no data loss or behavior regression: all file-resource code paths
are gated by the configured mode (default remains "sync"); when not in
ref-mode or when no resources exist, compaction and stats flows follow
existing code paths unchanged. Versioned Sync + resourceID maps ensure
newly synced sets replace older ones and RefManager prunes stale files;
GetFileResources returns an error if requested IDs are missing (prevents
silent use of wrong resources). Analyzer naming/parameter changes add
analyzer_extra_info but default-callers pass "" so existing analyzers
and index contents remain unchanged.
- New capability: DataNode compaction and StatsJobs can now build text
indexes using external file resources in Ref mode — DataCoord exposes
GetFileResources and populates CompactionPlan.file_resources;
SortCompaction/StatsTask download resources via fileresource.Manager,
produce an analyzer_extra_info JSON (storage + resource->id map) via
analyzer.BuildExtraResourceInfo, and propagate analyzer_extra_info into
BuildIndexInfo so the tantivy bindings can load custom analyzers during
text index creation.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: aoiasd <zhicheng.yue@zilliz.com>
related: #36380
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: aggregation is centralized and schema-aware — all
aggregate functions are created via the exec Aggregate registry
(milvus::exec::Aggregate) and validated by ValidateAggFieldType, use a
single in-memory accumulator layout (Accumulator/RowContainer) and
grouping primitives (GroupingSet, HashTable, VectorHasher), ensuring
consistent typing, null semantics and offsets across planner → exec →
reducer conversion paths (toAggregateInfo, Aggregate::create,
GroupingSet, AggResult converters).
- Removed / simplified logic: removed ad‑hoc count/group-by and reducer
code (CountNode/PhyCountNode, GroupByNode/PhyGroupByNode, cntReducer and
its tests) and consolidated into a unified AggregationNode →
PhyAggregationNode + GroupingSet + HashTable execution path and
centralized reducers (MilvusAggReducer, InternalAggReducer,
SegcoreAggReducer). AVG now implemented compositionally (SUM + COUNT)
rather than a bespoke operator, eliminating duplicate implementations.
- Why this does NOT cause data loss or regressions: existing data-access
and serialization paths are preserved and explicitly validated —
bulk_subscript / bulk_script_field_data and FieldData creation are used
for output materialization; converters (InternalResult2AggResult ↔
AggResult2internalResult, SegcoreResults2AggResult ↔
AggResult2segcoreResult) enforce shape/type/row-count validation; proxy
and plan-level checks (MatchAggregationExpression,
translateOutputFields, ValidateAggFieldType, translateGroupByFieldIds)
reject unsupported inputs (ARRAY/JSON, unsupported datatypes) early.
Empty-result generation and explicit error returns guard against silent
corruption.
- New capability and scope: end-to-end GROUP BY and aggregation support
added across the stack — proto (plan.proto, RetrieveRequest fields
group_by_field_ids/aggregates), planner nodes (AggregationNode,
ProjectNode, SearchGroupByNode), exec operators (PhyAggregationNode,
PhyProjectNode) and aggregation core (Aggregate implementations:
Sum/Count/Min/Max, SimpleNumericAggregate, RowContainer, GroupingSet,
HashTable) plus proxy/querynode reducers and tests — enabling grouped
and global aggregation (sum, count, min, max, avg via sum+count) with
schema-aware validation and reduction.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: MrPresent-Han <chun.han@gmail.com>
Co-authored-by: MrPresent-Han <chun.han@gmail.com>
Related to #46595
Remove the EnableStorageV2 config option and enforce StorageV2 format
across all write paths including compaction, import, write buffer, and
streaming segment allocation. V1 format write tests are now skipped as
writing V1 format is no longer supported.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Add configurable MAP_POPULATE flag support for mmap operations to reduce
page faults and improve first read performance.
Key changes:
- Add `queryNode.mmap.populate` config (default: true) to control
MAP_POPULATE flag usage
- Add `mmap_populate` parameter to MmapChunkTarget, ChunkTranslator,
GroupChunkTranslator, and ManifestGroupTranslator
- Apply MAP_POPULATE to both MmapChunkTarget and MemChunkTarget
- Propagate mmap_populate setting through chunk creation pipeline
When enabled, MAP_POPULATE pre-faults the mapped pages into memory,
eliminating page faults during subsequent access and improving query
performance for the first read operations.
issue: #46760
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #45640
- After async logging, the C log and go log has no order promise,
meanwhile the C log format is not consistent with Go Log; so we close
the output of glog, just forward the log result operation into Go side
which will be handled by the async zap logger.
- Use CGO to filter all cgo logging and promise the order between c log
and go log.
- Also fix the metric name, add new metric to count the logging.
- TODO: after woodpecker use the logger of milvus, we can add bigger
buffer for logging.
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: all C (glog) and Go logs must be routed through the
same zap async pipeline so ordering and formatting are preserved; this
PR ensures every glog emission is captured and forwarded to zap before
any async buffering diverges the outputs.
- Logic removed/simplified: direct glog outputs and hard
stdout/stderr/log_dir settings are disabled (configs/glog.conf and flags
in internal/core/src/config/ConfigKnowhere.cpp) because they are
redundant once a single zap sink handles all logs; logging metrics were
simplified from per-length/volatile gauges to totalized counters
(pkg/metrics/logging_metrics.go & pkg/log/*), removing duplicate
length-tracking and making accounting consistent.
- No data loss or behavior regression (concrete code paths): Google
logging now adds a GoZapSink (internal/core/src/common/logging_c.h,
logging_c.cpp) that calls the exported CGO bridge goZapLogExt
(internal/util/cgo/logging/logging.go). Go side uses
C.GoStringN/C.GoString to capture full message and file, maps glog
severities to zapcore levels, preserves caller info, and writes via the
existing zap async core (same write path used by Go logs). The C++
send() trims glog's trailing newline and forwards exact buffers/lengths,
so message content, file, line, and severity are preserved and
serialized through the same async writer—no log entries are dropped or
reordered relative to Go logs.
- Capability added (where it takes effect): a CGO bridge that forwards
glog into zap—new Go-exported function goZapLogExt
(internal/util/cgo/logging/logging.go), a GoZapSink in C++ that forwards
glog sends (internal/core/src/common/logging_c.h/.cpp), and blank
imports of the cgo initializer across multiple packages (various
internal/* files) to ensure the bridge is registered early so all C logs
are captured.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: chyezh <chyezh@outlook.com>
https://github.com/milvus-io/milvus/issues/42589
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Semantic Highlighting Feature
**Core Invariant**: Semantic highlighting operates on a per-field basis
with independent text processing through an external Zilliz highlight
provider. The implementation maintains field ID to field name mapping
and correlates highlight results back to original field outputs.
**What is Added**: This PR introduces semantic highlighting capability
for search results alongside the existing lexical highlighting. The
feature consists of:
- New `SemanticHighlight` orchestrator that validates queries/input
fields against collection schema, instantiates a Zilliz-based provider,
and batches text processing across multiple queries
- New `SemanticHighlighter` proxy wrapper implementing the `Highlighter`
interface for search pipeline integration
- New `semanticHighlightOperator` that processes search results by
delegating per-field text processing to the provider and attaching
correlated `HighlightResult` data to search outputs
- New gRPC service definition (`HighlightService`) and
`ZillizClient.Highlight()` method for external provider communication
**No Data Loss or Regression**: The change is purely additive without
modifying existing logic:
- Lexical highlighting path remains unchanged (separate switch case in
`createHighlightTask`)
- New `HighlightResults` field is only populated when semantic
highlighting is explicitly requested via `HighlightType_Semantic` enum
value
- Gracefully handles missing fields by returning explicit errors rather
than silent failures
- Pipeline operator integration follows existing patterns and only
processes when semantic highlighter is instantiated
**Why This Design**: Semantic highlighting is routed through the same
pipeline operator pattern as lexical highlighting, ensuring consistent
integration into search workflows. The per-field model allows flexible
highlighting across different text columns and batch processing ensures
efficient handling of multiple queries with configurable provider
constraints.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: junjie.jiang <junjie.jiang@zilliz.com>
issue: https://github.com/milvus-io/milvus/issues/44123
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: legacy in-cluster CDC/replication plumbing
(ReplicateMsg types, ReplicateID-based guards and flags) is obsolete —
the system relies on standard msgstream positions, subPos/end-ts
semantics and timetick ordering as the single source of truth for
message ordering and skipping, so replication-specific
channels/types/guards can be removed safely.
- Removed/simplified logic (what and why): removed replication feature
flags and params (ReplicateMsgChannel, TTMsgEnabled,
CollectionReplicateEnable), ReplicateMsg type and its tests, ReplicateID
constants/helpers and MergeProperties hooks, ReplicateConfig and its
propagation (streamPipeline, StreamConfig, dispatcher, target),
replicate-aware dispatcher/pipeline branches, and replicate-mode
pre-checks/timestamp-allocation in proxy tasks — these implemented a
redundant alternate “replicate-mode” pathway that duplicated
position/end-ts and timetick logic.
- Why this does NOT cause data loss or regression (concrete code paths):
no persistence or core write paths were removed — proxy PreExecute flows
(internal/proxy/task_*.go) still perform the same schema/ID/size
validations and then follow the normal non-replicate execution path;
dispatcher and pipeline continue to use position/subPos and
pullback/end-ts in Seek/grouping (pkg/mq/msgdispatcher/dispatcher.go,
internal/util/pipeline/stream_pipeline.go), so skipping and ordering
behavior remains unchanged; timetick emission in rootcoord
(sendMinDdlTsAsTt) is now ungated (no silent suppression), preserving or
increasing timetick delivery rather than removing it.
- PR type and net effect: Enhancement/Refactor — removes deprecated
replication API surface (types, helpers, config, tests) and replication
branches, simplifies public APIs and constructor signatures, and reduces
surface area for future maintenance while keeping DML/DDL persistence,
ordering, and seek semantics intact.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
related: #45993
Add nullable vector support in import utility layer
Key changes:
ImportV2 util:
- Add nullable vector types (FloatVector, Float16Vector, BFloat16Vector,
BinaryVector, SparseFloatVector, Int8Vector) to
AppendNullableDefaultFieldsData()
- Add tests for nullable vector field data appending
CSV/JSON/Numpy readers:
- Add nullPercent parameter to test data generation for better null
coverage
- Mark vector fields as nullable in test schemas
- Add test cases for nullable vector field parsing
- Refactor tests to use loop-based approach with 0%, 50%, 100% null
percentages
Parquet field reader:
- Add ReadNullableBinaryData() for nullable
BinaryVector/Float16Vector/BFloat16Vector
- Add ReadNullableFloatVectorData() for nullable FloatVector
- Add ReadNullableSparseFloatVectorData() for nullable SparseFloatVector
- Add ReadNullableInt8VectorData() for nullable Int8Vector
- Add ReadNullableStructData() for generic nullable struct data
- Update Next() to use nullable read methods when field is nullable
- Add null data validation for non-nullable fields
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: import must preserve per-row alignment and validity
for every field — nullable vector fields are expected to be encoded with
per-row validity masks and all readers/writers must emit arrays aligned
to original input rows (null entries represented explicitly).
- New feature & scope: adds end-to-end nullable-vector support in the
import utility layer — AppendNullableDefaultFieldsData in
internal/datanode/importv2/util.go now appends nil placeholders for
nullable vectors (FloatVector, Float16Vector, BFloat16Vector,
BinaryVector, SparseFloatVector, Int8Vector); parquet reader
(internal/util/importutilv2/parquet/field_reader.go) adds
ReadNullableBinaryData, ReadNullableFloatVectorData,
ReadNullableSparseFloatVectorData, ReadNullableInt8VectorData,
ReadNullableStructData and routes nullable branches to these helpers;
CSV/JSON/Numpy readers and test utilities updated to generate and
validate 0/50/100% null scenarios and mark vector fields as nullable in
test schemas.
- Logic removed / simplified: eliminates ad-hoc "parameter-invalid"
rejections for nullable vectors inside FieldReader.Next by centralizing
nullable handling into ReadNullable* helpers and shared validators
(getArrayDataNullable,
checkNullableVectorAlignWithDim/checkNullableVectorAligned), simplifying
control flow and removing scattered special-case checks.
- No data loss / no regression (concrete code paths): nulls are
preserved end-to-end — AppendNullableDefaultFieldsData explicitly
inserts nil entries per null row (datanode import append path);
ReadNullable*Data helpers return both data and []bool validity masks so
callers in field_reader.go and downstream readers receive exact per-row
validity; testutil.BuildSparseVectorData was extended to accept
validData so sparse vectors are materialized only for valid rows while
null rows are represented as missing. These concrete paths ensure null
rows are represented rather than dropped, preventing data loss or
behavioral regression.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: marcelo-cjl <marcelo.chen@zilliz.com>
Support crate analyzer with file resource info, and return used file
resource ids when validate analyzer.
Save the related resource ids in collection schema.
relate: https://github.com/milvus-io/milvus/issues/43687
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: analyzer file-resource resolution is deterministic and
traceable by threading a FileResourcePathHelper (collecting used
resource IDs in a HashSet) through all tokenizer/analyzer construction
and validation paths; validate_analyzer(params, extra_info) returns the
collected Vec<i64) which is propagated through C/Rust/Go layers to
callers (CValidateResult → RustResult::from_vec_i64 → Go []int64 →
querypb.ValidateAnalyzerResponse.ResourceIds →
CollectionSchema.FileResourceIds).
- Logic removed/simplified: ad‑hoc, scattered resource-path lookups and
per-filter file helpers (e.g., read_synonyms_file and other inline
file-reading logic) were consolidated into ResourceInfo +
FileResourcePathHelper and a centralized get_resource_path(helper, ...)
API; filter/tokenizer builder APIs now accept &mut
FileResourcePathHelper so all file path resolution and ID collection use
the same path and bookkeeping logic (redundant duplicated lookups
removed).
- Why no data loss or behavior regression: changes are additive and
default-preserving — existing call sites pass extra_info = "" so
analyzer creation/validation behavior and error paths remain unchanged;
new Collection.FileResourceIds is populated from resp.ResourceIds in
validateSchema and round‑tripped through marshal/unmarshal
(model.Collection ↔ schemapb.CollectionSchema) so schema persistence
uses the new list without overwriting other schema fields; proto change
adds a repeated field (resource_ids) which is wire‑compatible (older
clients ignore extra field). Concrete code paths: analyzer creation
still uses create_analyzer (now with extra_info ""), tokenizer
validation still returns errors as before but now also returns IDs via
CValidateResult/RustResult, and rootcoord.validateSchema assigns
resp.ResourceIds → schema.FileResourceIds.
- New capability added: end‑to‑end discovery, return, and persistence of
file resource IDs used by analyzers — validate flows now return resource
IDs and the system stores them in collection schema (affects tantivy
analyzer binding, canalyzer C bindings, internal/util analyzer APIs,
querynode ValidateAnalyzer response, and rootcoord/create_collection
flow).
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: aoiasd <zhicheng.yue@zilliz.com>
Related to #46133
Move jemalloc_stats.go and its test file from pkg/util/hardware to
internal/util/segcore. This is a more appropriate location because:
- jemalloc_stats depends on milvus_core C++ library via cgo
- The pkg directory should remain independent of internal C++
dependencies
- segcore is the natural home for core memory allocator utilities
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Refactor**
* Improved internal code organization by reorganizing memory statistics
collection infrastructure for better maintainability and modularity. No
impact on end-user functionality or behavior.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #46400
- add new server label rule.
- add `MILVUS_SERVER_LABEL_RESOURCE_GROUP` to determine the resource
group of querynode.
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Automatic creation of resource groups when nodes with resource-group
labels join.
* Expanded server-label system supporting role-specific and global
labels.
* **Bug Fixes**
* Node acceptance now enforces resource-group name compatibility,
preventing cross-group assignment.
* **Refactor**
* Node handling flows updated to use richer node information for
assignment and validation.
* **Tests**
* Added tests validating resource-group labeling and node acceptance
behavior.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: chyezh <chyezh@outlook.com>
related: #45993
This commit extends nullable vector support to the proxy layer,
querynode,
and adds comprehensive validation, search reduce, and field data
handling
for nullable vectors with sparse storage.
Proxy layer changes:
- Update validate_util.go checkAligned() with getExpectedVectorRows()
helper
to validate nullable vector field alignment using valid data count
- Update checkFloatVectorFieldData/checkSparseFloatVectorFieldData for
nullable vector validation with proper row count expectations
- Add FieldDataIdxComputer in typeutil/schema.go for logical-to-physical
index translation during search reduce operations
- Update search_reduce_util.go reduceSearchResultData to use
idxComputers
for correct field data indexing with nullable vectors
- Update task.go, task_query.go, task_upsert.go for nullable vector
handling
- Update msg_pack.go with nullable vector field data processing
QueryNode layer changes:
- Update segments/result.go for nullable vector result handling
- Update segments/search_reduce.go with nullable vector offset
translation
Storage and index changes:
- Update data_codec.go and utils.go for nullable vector serialization
- Update indexcgowrapper/dataset.go and index.go for nullable vector
indexing
Utility changes:
- Add FieldDataIdxComputer struct with Compute() method for efficient
logical-to-physical index mapping across multiple field data
- Update EstimateEntitySize() and AppendFieldData() with fieldIdxs
parameter
- Update funcutil.go with nullable vector support functions
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Full support for nullable vector fields (float, binary, float16,
bfloat16, int8, sparse) across ingest, storage, indexing, search and
retrieval; logical↔physical offset mapping preserves row semantics.
* Client: compaction control and compaction-state APIs.
* **Bug Fixes**
* Improved validation for adding vector fields (nullable + dimension
checks) and corrected search/query behavior for nullable vectors.
* **Chores**
* Persisted validity maps with indexes and on-disk formats.
* **Tests**
* Extensive new and updated end-to-end nullable-vector tests.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: marcelo-cjl <marcelo.chen@zilliz.com>
issue: https://github.com/milvus-io/milvus/issues/45525
see added README.md for added optimizations
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Added query expression optimization feature with a new `optimizeExpr`
configuration flag to enable automatic simplification of filter
predicates, including range predicate optimization, merging of IN/NOT IN
conditions, and flattening of nested logical operators.
* **Bug Fixes**
* Adjusted delete operation behavior to correctly handle expression
evaluation.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
relate: https://github.com/milvus-io/milvus/issues/42589
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
## New Features
- Added `concurrency_per_cpu_core` configuration parameter for the
analyzer component, enabling customizable per-CPU concurrency tuning
(default: 8).
## Tests
- Added test coverage for batch analysis operations.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: aoiasd <zhicheng.yue@zilliz.com>
This PR improves the robustness of object storage operations by retrying
both explicit throttling errors (e.g. HTTP 429, SlowDown, ServerBusy).
These errors commonly occur under high concurrency and are typically
recoverable with bounded retries.
issue: https://github.com/milvus-io/milvus/issues/44772
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Configurable retry support for reads from object storage and improved
mapping of transient/rate-limit errors.
* Added a retryable reader wrapper used by CSV/JSON/Parquet/Numpy import
paths.
* **Configuration**
* New parameter to control storage read retry attempts.
* **Tests**
* Expanded unit tests covering error mapping and retry behaviors across
storage backends.
* Standardized mock readers and test initialization to simplify test
setups.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #46451
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Session versioning added to validate coordinator compatibility during
registration and active takeover.
* **Changes**
* Active–standby flow simplified: standby-to-active activation now
always enabled and initialized unconditionally.
* Registration uses version-aware transactions to ensure version
consistency during takeover.
* Startup/health startup path streamlined.
* **Tests**
* Added version-key integration test; removed test for disabling
active-standby.
* Updated flush test to assert rate-limiter errors occur.
* **Chores**
* Removed centralized connection manager and its test suite.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: chyezh <chyezh@outlook.com>
AddProxyClients now removes clients not in the new snapshot before
adding new ones. This ensures proper cleanup when ProxyWatcher re-watche
etcd.
issue: https://github.com/milvus-io/milvus/issues/46397
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: https://github.com/milvus-io/milvus/issues/45890
ComputePhraseMatchSlop accepts three pararms:
1. A string: query text
2. Some trings: data texts
3. Analyzer params,
Slop will be calculated for the query text with each data text in the
context of phrase match where they are tokenized with tokenizer with
analyzer params.
So two array will be returned:
1. is_match: is phrase match can sucess
2. slop: the related slop if phrase match can sucess, or -1 is cannot.
---------
Signed-off-by: SpadeA <tangchenjie1210@gmail.com>
issue: #46358
This PR implements segment reopening functionality on query nodes,
enabling the application of data or schema changes to already-loaded
segments without requiring a full reload.
### Core (C++)
**New SegmentLoadInfo class**
(`internal/core/src/segcore/SegmentLoadInfo.h/cpp`):
- Encapsulates segment load configuration with structured access
- Implements `ComputeDiff()` to calculate differences between old and
new load states
- Tracks indexes, binlogs, and column groups that need to be loaded or
dropped
- Provides `ConvertFieldIndexInfoToLoadIndexInfo()` for index loading
**ChunkedSegmentSealedImpl modifications**:
- Added `Reopen(const SegmentLoadInfo&)` method to apply incremental
changes based on computed diff
- Refactored `LoadColumnGroups()` and `LoadColumnGroup()` to support
selective loading via field ID map
- Extracted `LoadBatchIndexes()` and `LoadBatchFieldData()` for reusable
batch loading logic
- Added `LoadManifest()` for manifest-based loading path
- Updated all methods to use `SegmentLoadInfo` wrapper instead of direct
proto access
**SegmentGrowingImpl modifications**:
- Added `Reopen()` stub method for interface compliance
**C API additions** (`segment_c.h/cpp`):
- Added `ReopenSegment()` function exposing reopen to Go layer
### Go Side
**QueryNode handlers** (`internal/querynodev2/`):
- Added `HandleReopen()` in handlers.go
- Added `ReopenSegments()` RPC in services.go
**Segment interface** (`internal/querynodev2/segments/`):
- Extended `Segment` interface with `Reopen()` method
- Implemented `Reopen()` in LocalSegment
- Added `Reopen()` to segment loader
**Segcore wrapper** (`internal/util/segcore/`):
- Added `Reopen()` method in segment.go
- Added `ReopenSegmentRequest` in requests.go
### Proto
- Added new fields to support reopen in `query_coord.proto`
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: https://github.com/milvus-io/milvus/issues/42148
For a vector field inside a STRUCT, since a STRUCT can only appear as
the element type of an ARRAY field, the vector field in STRUCT is
effectively an array of vectors, i.e. an embedding list.
Milvus already supports searching embedding lists with metrics whose
names start with the prefix MAX_SIM_.
This PR allows Milvus to search embeddings inside an embedding list
using the same metrics as normal embedding fields. Each embedding in the
list is treated as an independent vector and participates in ANN search.
Further, since STRUCT may contain scalar fields that are highly related
to the embedding field, this PR introduces an element-level filter
expression to refine search results.
The grammar of the element-level filter is:
element_filter(structFieldName, $[subFieldName] == 3)
where $[subFieldName] refers to the value of subFieldName in each
element of the STRUCT array structFieldName.
It can be combined with existing filter expressions, for example:
"varcharField == 'aaa' && element_filter(struct_field, $[struct_int] ==
3)"
A full example:
```
struct_schema = milvus_client.create_struct_field_schema()
struct_schema.add_field("struct_str", DataType.VARCHAR, max_length=65535)
struct_schema.add_field("struct_int", DataType.INT32)
struct_schema.add_field("struct_float_vec", DataType.FLOAT_VECTOR, dim=EMBEDDING_DIM)
schema.add_field(
"struct_field",
datatype=DataType.ARRAY,
element_type=DataType.STRUCT,
struct_schema=struct_schema,
max_capacity=1000,
)
...
filter = "varcharField == 'aaa' && element_filter(struct_field, $[struct_int] == 3 && $[struct_str] == 'abc')"
res = milvus_client.search(
COLLECTION_NAME,
data=query_embeddings,
limit=10,
anns_field="struct_field[struct_float_vec]",
filter=filter,
output_fields=["struct_field[struct_int]", "varcharField"],
)
```
TODO:
1. When an `element_filter` expression is used, a regular filter
expression must also be present. Remove this restriction.
2. Implement `element_filter` expressions in the `query`.
---------
Signed-off-by: SpadeA <tangchenjie1210@gmail.com>
issue: #45597
The streaming node currently cannot use GPU resources and does not need
to perform initialization.
Signed-off-by: xianliang.li <xianliang.li@zilliz.com>
relate:https://github.com/milvus-io/milvus/issues/43687
Support use file resource with sync mode.
Auto download or remove file resource to local when user add or remove
file resource.
Sync file resource to node when find new node session.
---------
Signed-off-by: aoiasd <zhicheng.yue@zilliz.com>
Related to #45910
When IndexNodeBinding mode is enabled, DataCoord skips session watching
for datanodes but the dnSessionWatcher field remains nil. This causes a
panic when other code attempts to access the watcher.
This fix introduces an EmptySessionWatcher as a placeholder for the
IndexNodeBinding mode scenario. The empty watcher implements the
SessionWatcher interface with no-op methods, preventing nil pointer
dereferences while maintaining the expected interface contract.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #45640
- log may be dropped if the underlying file system is busy.
- use async write syncer to avoid the log operation block the milvus
major system.
- remove some log dependency from the until function to avoid
dependency-loop.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #45831
This PR fixes a race condition in `TestZillizClient` test cases where
`t.Logf`
could be called after the test function had returned, leading to a panic
or data race failure.
Root cause:
1. Incorrect defer order: `defer s.Stop()` was called after `defer
lis.Close()`.
This caused `lis.Accept()` to return an error before `s.Stop()` had set
the quit flag,
triggering the error handling path in the server goroutine.
2. Unsafe logging: The error handling path used `t.Logf` inside a
goroutine, which
is unsafe if the main test function exits before the log is printed.
Fixes:
- Changed defer order to ensure `s.Stop()` is called before
`lis.Close()`.
- Replaced `t.Logf` with `fmt.Printf` in the background goroutine to
avoid panic on test completion.
Signed-off-by: Li Liu <li.liu@zilliz.com>
issue: #45728
When mixcoord is in standby mode and shutdown is triggered, the
ProcessActiveStandBy goroutine may panic if context cancellation occurs.
This happens because the error handling didn't check for
context.Canceled errors before panicking.
Changes:
- Add context cancellation check in mix_coord Register() before panic
- Check s.ctx.Err() == context.Canceled and gracefully exit
- Remove unused ForceActiveStandby() function from session_util
This ensures standby mixcoord can shutdown gracefully without panic when
context is cancelled during the standby process.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Related to #44956
**New Translator (C++)**
- Added `ManifestGroupTranslator`
(`internal/core/src/segcore/storagev2translator/`)
- Translates manifest-based column groups to Milvus internal format
- Implements `GroupCTMeta` interface for chunk-based column access
- Supports both memory and mmap storage modes
- Handles cache warmup policies for vector and scalar data
**ChunkedSegmentSealedImpl**
(`internal/core/src/segcore/ChunkedSegmentSealedImpl.cpp:333`)
- Added `LoadColumnGroups(const std::string& manifest_path)`: Main entry
point for manifest-based loading
- Creates milvus-storage Reader from manifest file
- Parallelizes column group loading using thread pool
- Aggregates loading exceptions and reports errors
- Added `LoadColumnGroup()`: Loads individual column group
- Extracts field IDs from column group metadata
- Creates ManifestGroupTranslator for each column group
- Builds ProxyChunkColumn for field access
- Special handling for timestamp field index construction
**SegmentGrowingImpl**
(`internal/core/src/segcore/SegmentGrowingImpl.cpp`)
- Added similar `LoadColumnGroups()` and `LoadColumnGroup()` methods for
growing segments
- Maintains consistency with sealed segment loading path
Storage FFI Utilities
**loon_ffi/util** (`internal/core/src/storage/loon_ffi/util.cpp`)
- Added `MakeInternalPropertiesFromStorageConfig()`: Converts C storage
config to internal Properties
- Maps all storage configuration fields (S3, GCS, Azure, local)
- Handles SSL, IAM, virtual host settings
- Configures connection timeouts and max connections
- Added `MakeInternalLocalProperies()`: Creates local filesystem
properties
- Added `ToCStorageConfig()`: Converts Go StorageConfig to C
representation
- Added `GetColumnGroups()`: Extracts column groups from manifest file
using Transaction API
Protocol Buffer Changes
**segcore.proto** (`pkg/proto/segcore.proto:121`)
- Added `manifest_path` field to `SegmentLoadInfo` message
- Enables passing manifest file path from Go layer to C++ core
Go Integration
**segment.go** (`internal/util/segcore/segment.go:372`)
- Updated `ConvertToSegcoreSegmentLoadInfo()` to propagate
`ManifestPath` field
- Bridges QueryNode segment load info to Segcore format
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Related to #44620
Related to unstable ut "internal/querycoordv2 TestServer/TestNodeUp"
Introduce SessionWatcher interface to fix race condition and goroutine
leak that caused unstable unit test TestServer/TestNodeUp.
Changes:
- Add SessionWatcher interface with EventChannel() and Stop() methods
- Refactor WatchServices() to return SessionWatcher instead of raw
channel
- Fix cleanup order in QueryCoordV2: stop watcher before session
- Update DataCoord, ConnectionManager to use SessionWatcher
- Add MockSessionWatcher for testing
Fixes race condition between session context cancellation and internal
loop exit. Eliminates goroutine leak by providing explicit lifecycle
management.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
https://github.com/milvus-io/milvus/issues/45544
- Add batch_factor configuration parameter (default: 5) to control
embedding provider batch sizes
- Add disable_func_runtime_check property to bypass function validation
during collection creation
- Add database interceptor support for AddCollectionFunction,
AlterCollectionFunction, and DropCollectionFunction requests
Signed-off-by: junjie.jiang <junjie.jiang@zilliz.com>
