issue: #46540
Empty timetick is just used to sync up the time clock between different
component in milvus. So empty timetick can be ignored if we achieve the
lsn/mvcc semantic for timetick. Currently, some components need the
empty timetick to trigger some operation, such as flush/tsafe. So we
only slow down the empty time tick for 5 seconds.
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: with LSN/MVCC semantics consumers only need (a) the
first timetick that advances the latest-required-MVCC to unblock
MVCC-dependent waits and (b) occasional periodic timeticks (~≤5s) for
clock synchronization—therefore frequent non-persisted empty timeticks
can be suppressed without breaking MVCC correctness.
- Logic removed/simplified: per-message dispatch/consumption of frequent
non-persisted empty timeticks is suppressed — an MVCC-aware filter
emptyTimeTickSlowdowner (internal/util/pipeline/consuming_slowdown.go)
short-circuits frequent empty timeticks in the stream pipeline
(internal/util/pipeline/stream_pipeline.go), and the WAL flusher
rate-limits non-persisted timetick dispatch to one emission per ~5s
(internal/streamingnode/server/flusher/flusherimpl/wal_flusher.go); the
delegator exposes GetLatestRequiredMVCCTimeTick to drive the filter
(internal/querynodev2/delegator/delegator.go).
- Why this does NOT introduce data loss or regressions: the slowdowner
always refreshes latestRequiredMVCCTimeTick via
GetLatestRequiredMVCCTimeTick and (1) never filters timeticks <
latestRequiredMVCCTimeTick (so existing tsafe/flush waits stay
unblocked) and (2) always lets the first timetick ≥
latestRequiredMVCCTimeTick pass to notify pending MVCC waits;
separately, WAL flusher suppression applies only to non-persisted
timeticks and still emits when the 5s threshold elapses, preserving
periodic clock-sync messages used by flush/tsafe.
- Enhancement summary (where it takes effect): adds
GetLatestRequiredMVCCTimeTick on ShardDelegator and
LastestMVCCTimeTickGetter, wires emptyTimeTickSlowdowner into
NewPipelineWithStream (internal/util/pipeline), and adds WAL flusher
rate-limiting + metrics
(internal/streamingnode/server/flusher/flusherimpl/wal_flusher.go,
pkg/metrics) to reduce CPU/dispatch overhead while keeping MVCC
correctness and periodic synchronization.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: chyezh <chyezh@outlook.com>
Add support for DataNode compaction using file resources in ref mode.
SortCompation and StatsJobs will build text indexes, which may use file
resources.
relate: https://github.com/milvus-io/milvus/issues/43687
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: file resources (analyzer binaries/metadata) are only
fetched, downloaded and used when the node is configured in Ref mode
(fileresource.IsRefMode via CommonCfg.QNFileResourceMode /
DNFileResourceMode); Sync now carries a version and managers track
per-resource versions/resource IDs so newer resource sets win and older
entries are pruned (RefManager/SynchManager resource maps).
- Logic removed / simplified: component-specific FileResourceMode flags
and an indirection through a long-lived BinlogIO wrapper were
consolidated — file-resource mode moved to CommonCfg, Sync/Download APIs
became version- and context-aware, and compaction/index tasks accept a
ChunkManager directly (binlog IO wrapper creation inlined). This
eliminates duplicated config checks and wrapper indirection while
preserving the same chunk/IO semantics.
- Why no data loss or behavior regression: all file-resource code paths
are gated by the configured mode (default remains "sync"); when not in
ref-mode or when no resources exist, compaction and stats flows follow
existing code paths unchanged. Versioned Sync + resourceID maps ensure
newly synced sets replace older ones and RefManager prunes stale files;
GetFileResources returns an error if requested IDs are missing (prevents
silent use of wrong resources). Analyzer naming/parameter changes add
analyzer_extra_info but default-callers pass "" so existing analyzers
and index contents remain unchanged.
- New capability: DataNode compaction and StatsJobs can now build text
indexes using external file resources in Ref mode — DataCoord exposes
GetFileResources and populates CompactionPlan.file_resources;
SortCompaction/StatsTask download resources via fileresource.Manager,
produce an analyzer_extra_info JSON (storage + resource->id map) via
analyzer.BuildExtraResourceInfo, and propagate analyzer_extra_info into
BuildIndexInfo so the tantivy bindings can load custom analyzers during
text index creation.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: aoiasd <zhicheng.yue@zilliz.com>
Related to #46595
Remove the EnableStorageV2 config option and enforce StorageV2 format
across all write paths including compaction, import, write buffer, and
streaming segment allocation. V1 format write tests are now skipped as
writing V1 format is no longer supported.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #46090
This change introduces a global node blacklist mechanism to immediately
cut off query traffic to failed delegators across all concurrent
requests.
Key features:
- Introduce ChannelBlacklist to track failed delegator nodes per channel
- When a query fails, the node is immediately blacklisted and excluded
from ALL subsequent requests (not just retries within the same request)
- Blacklisted nodes are automatically excluded during node selection
- Entries expire after configurable duration (default 30s) to allow
automatic recovery when nodes become healthy again
- Background cleanup loop removes expired entries periodically
- Add proxy.replicaBlacklistDuration and
proxy.replicaBlacklistCleanupInterval configuration parameters
- Blacklist can be disabled by setting duration to 0
Before this change:
- Failed nodes were only excluded within the same request's retry loop
- Concurrent requests would still attempt to query the failed node
- Each request had to experience its own failure before avoiding the
node
After this change:
- Once a node fails, it is immediately excluded from all requests
- New requests arriving during the blacklist period will skip the failed
node without experiencing any failure
- This significantly reduces latency spikes during node failures
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #44358
Implement complete snapshot management system including creation,
deletion, listing, description, and restoration capabilities across all
system components.
Key features:
- Create snapshots for entire collections
- Drop snapshots by name with proper cleanup
- List snapshots with collection filtering
- Describe snapshot details and metadata
Components added/modified:
- Client SDK with full snapshot API support and options
- DataCoord snapshot service with metadata management
- Proxy layer with task-based snapshot operations
- Protocol buffer definitions for snapshot RPCs
- Comprehensive unit tests with mockey framework
- Integration tests for end-to-end validation
Technical implementation:
- Snapshot metadata storage in etcd with proper indexing
- File-based snapshot data persistence in object storage
- Garbage collection integration for snapshot cleanup
- Error handling and validation across all operations
- Thread-safe operations with proper locking mechanisms
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant/assumption: snapshots are immutable point‑in‑time
captures identified by (collection, snapshot name/ID); etcd snapshot
metadata is authoritative for lifecycle (PENDING → COMMITTED → DELETING)
and per‑segment manifests live in object storage (Avro / StorageV2). GC
and restore logic must see snapshotRefIndex loaded
(snapshotMeta.IsRefIndexLoaded) before reclaiming or relying on
segment/index files.
- New capability added: full end‑to‑end snapshot subsystem — client SDK
APIs (Create/Drop/List/Describe/Restore + restore job queries),
DataCoord SnapshotWriter/Reader (Avro + StorageV2 manifests),
snapshotMeta in meta, SnapshotManager orchestration
(create/drop/describe/list/restore), copy‑segment restore
tasks/inspector/checker, proxy & RPC surface, GC integration, and
docs/tests — enabling point‑in‑time collection snapshots persisted to
object storage and restorations orchestrated across components.
- Logic removed/simplified and why: duplicated recursive
compaction/delta‑log traversal and ad‑hoc lookup code were consolidated
behind two focused APIs/owners (Handler.GetDeltaLogFromCompactTo for
delta traversal and SnapshotManager/SnapshotReader for snapshot I/O).
MixCoord/coordinator broker paths were converted to thin RPC proxies.
This eliminates multiple implementations of the same traversal/lookup,
reducing divergence and simplifying responsibility boundaries.
- Why this does NOT introduce data loss or regressions: snapshot
create/drop use explicit two‑phase semantics (PENDING → COMMIT/DELETING)
with SnapshotWriter writing manifests and metadata before commit; GC
uses snapshotRefIndex guards and
IsRefIndexLoaded/GetSnapshotBySegment/GetSnapshotByIndex checks to avoid
removing referenced files; restore flow pre‑allocates job IDs, validates
resources (partitions/indexes), performs rollback on failure
(rollbackRestoreSnapshot), and converts/updates segment/index metadata
only after successful copy tasks. Extensive unit and integration tests
exercise pending/deleting/GC/restore/error paths to ensure idempotence
and protection against premature deletion.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Add configurable MAP_POPULATE flag support for mmap operations to reduce
page faults and improve first read performance.
Key changes:
- Add `queryNode.mmap.populate` config (default: true) to control
MAP_POPULATE flag usage
- Add `mmap_populate` parameter to MmapChunkTarget, ChunkTranslator,
GroupChunkTranslator, and ManifestGroupTranslator
- Apply MAP_POPULATE to both MmapChunkTarget and MemChunkTarget
- Propagate mmap_populate setting through chunk creation pipeline
When enabled, MAP_POPULATE pre-faults the mapped pages into memory,
eliminating page faults during subsequent access and improving query
performance for the first read operations.
issue: #46760
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue： #46033
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Pull Request Summary: Entity-Level TTL Field Support
### Core Invariant and Design
This PR introduces **per-entity TTL (time-to-live) expiration** via a
dedicated TIMESTAMPTZ field as a fine-grained alternative to
collection-level TTL. The key invariant is **mutual exclusivity**:
collection-level TTL and entity-level TTL field cannot coexist on the
same collection. Validation is enforced at the proxy layer during
collection creation/alteration (`validateTTL()` prevents both being set
simultaneously).
### What Is Removed and Why
- **Global `EntityExpirationTTL` parameter** removed from config
(`configs/milvus.yaml`, `pkg/util/paramtable/component_param.go`). This
was the only mechanism for collection-level expiration. The removal is
safe because:
- The collection-level TTL path (`isEntityExpired(ts)` check) remains
intact in the codebase for backward compatibility
- TTL field check (`isEntityExpiredByTTLField()`) is a secondary path
invoked only when a TTL field is configured
- Existing deployments using collection TTL can continue without
modification
The global parameter was removed specifically because entity-level TTL
makes per-entity control redundant with a collection-wide setting, and
the PR chooses one mechanism per collection rather than layering both.
### No Data Loss or Behavior Regression
**TTL filtering logic is additive and safe:**
1. **Collection-level TTL unaffected**: The `isEntityExpired(ts)` check
still applies when no TTL field is configured; callers of
`EntityFilter.Filtered()` pass `-1` as the TTL expiration timestamp when
no field exists, causing `isEntityExpiredByTTLField()` to return false
immediately
2. **Null/invalid TTL values treated safely**: Rows with null TTL or TTL
≤ 0 are marked as "never expire" (using sentinel value `int64(^uint64(0)
>> 1)`) and are preserved across compactions; percentile calculations
only include positive TTL values
3. **Query-time filtering automatic**: TTL filtering is transparently
added to expression compilation via `AddTTLFieldFilterExpressions()`,
which appends `(ttl_field IS NULL OR ttl_field > current_time)` to the
filter pipeline. Entities with null TTL always pass the filter
4. **Compaction triggering granular**: Percentile-based expiration (20%,
40%, 60%, 80%, 100%) allows configurable compaction thresholds via
`SingleCompactionRatioThreshold`, preventing premature data deletion
### Capability Added: Per-Entity Expiration with Data Distribution
Awareness
Users can now specify a TIMESTAMPTZ collection property `ttl_field`
naming a schema field. During data writes, TTL values are collected per
segment and percentile quantiles (5-value array) are computed and stored
in segment metadata. At query time, the TTL field is automatically
filtered. At compaction time, segment-level percentiles drive
expiration-based compaction decisions, enabling intelligent compaction
of segments where a configurable fraction of data has expired (e.g.,
compact when 40% of rows are expired, controlled by threshold ratio).
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
issue: https://github.com/milvus-io/milvus/issues/44123
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: legacy in-cluster CDC/replication plumbing
(ReplicateMsg types, ReplicateID-based guards and flags) is obsolete —
the system relies on standard msgstream positions, subPos/end-ts
semantics and timetick ordering as the single source of truth for
message ordering and skipping, so replication-specific
channels/types/guards can be removed safely.
- Removed/simplified logic (what and why): removed replication feature
flags and params (ReplicateMsgChannel, TTMsgEnabled,
CollectionReplicateEnable), ReplicateMsg type and its tests, ReplicateID
constants/helpers and MergeProperties hooks, ReplicateConfig and its
propagation (streamPipeline, StreamConfig, dispatcher, target),
replicate-aware dispatcher/pipeline branches, and replicate-mode
pre-checks/timestamp-allocation in proxy tasks — these implemented a
redundant alternate “replicate-mode” pathway that duplicated
position/end-ts and timetick logic.
- Why this does NOT cause data loss or regression (concrete code paths):
no persistence or core write paths were removed — proxy PreExecute flows
(internal/proxy/task_*.go) still perform the same schema/ID/size
validations and then follow the normal non-replicate execution path;
dispatcher and pipeline continue to use position/subPos and
pullback/end-ts in Seek/grouping (pkg/mq/msgdispatcher/dispatcher.go,
internal/util/pipeline/stream_pipeline.go), so skipping and ordering
behavior remains unchanged; timetick emission in rootcoord
(sendMinDdlTsAsTt) is now ungated (no silent suppression), preserving or
increasing timetick delivery rather than removing it.
- PR type and net effect: Enhancement/Refactor — removes deprecated
replication API surface (types, helpers, config, tests) and replication
branches, simplifies public APIs and constructor signatures, and reduces
surface area for future maintenance while keeping DML/DDL persistence,
ordering, and seek semantics intact.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #46550
- Add CatchUpStreamingDataTsLag parameter to control tolerable lag
threshold for delegator to be considered caught up
- Add catchingUpStreamingData field in delegator to track whether
delegator has caught up with streaming data
- Add catching_up_streaming_data field in LeaderViewStatus proto
- Check catching up status in CheckDelegatorDataReady, return not
ready when delegator is still catching up streaming data
- Add unit tests for the new functionality
When tsafe lag exceeds the threshold, the distribution will not be
considered serviceable, preventing queries from timing out in waitTSafe.
This is useful when streaming message queue consumption is slow.
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
- Core invariant: a delegator must not be considered serviceable while
its tsafe lags behind the latest committed timestamp beyond a
configurable tolerance; a delegator is "caught-up" only when
(latestTsafe - delegator.GetTSafe()) < CatchUpStreamingDataTsLag
(configured by queryNode.delegator.catchUpStreamingDataTsLag, default
1s).
- New capability and where it takes effect: adds streaming-catchup
tracking to QueryNode/QueryCoord — an atomic catchingUpStreamingData
flag on shardDelegator (internal/querynodev2/delegator/delegator.go), a
new param CatchUpStreamingDataTsLag
(pkg/util/paramtable/component_param.go), and a
LeaderViewStatus.catching_up_streaming_data field in the proto
(pkg/proto/query_coord.proto). The flag is exposed in
GetDataDistribution (internal/querynodev2/services.go) and used by
QueryCoord readiness checks
(internal/querycoordv2/utils/util.go::CheckDelegatorDataReady) to reject
leaders that are still catching up.
- What logic is simplified/added (not removed): instead of relying
solely on segment distribution/worker heartbeats, the PR adds an
explicit readiness gate that returns "not available" when the delegator
reports catching-up-streaming-data. This is strictly additive — no
existing checks are removed; the new precondition runs before segment
availability validation to prevent premature routing to slow-consuming
delegators.
- Why this does NOT cause data loss or regress behavior: the change only
controls serviceability visibility and routing — it never drops or
mutates data. Concretely: shardDelegator starts with
catchingUpStreamingData=true and flips to false in UpdateTSafe once the
sampled lag falls below the configured threshold
(internal/querynodev2/delegator/delegator.go::UpdateTSafe). QueryCoord
will short-circuit in CheckDelegatorDataReady when
leader.Status.GetCatchingUpStreamingData() is true
(internal/querycoordv2/utils/util.go), returning a channel-not-available
error before any segment checks; when the flag clears, existing
segment-distribution checks (same code paths) resume. Tests added cover
both catching-up and caught-up paths
(internal/querynodev2/delegator/delegator_test.go,
internal/querycoordv2/utils/util_test.go,
internal/querynodev2/services_test.go), demonstrating convergence
without changed data flows or deletion of data.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
### **Description**
- Add `-buildvcs=false` flag to Go test commands in coverage script
- Increase default session TTL from 10s to 15s
- Update SessionTTL parameter default value from 30 to 15
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
Co-authored-by: bigsheeper <yihao.dai@zilliz.com>
Co-authored-by: chyezh <chyezh@outlook.com>
Co-authored-by: czs007 <zhenshan.cao@zilliz.com>
Introduce a ScannerStartupDelay configuration to enable WAL write-only
recovery, allowing fence messages to be persisted during
primary–secondary switchover when the StreamingNode is trapped in crash
loops.
issue: https://github.com/milvus-io/milvus/issues/46368
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Added a configurable WAL scanner pause/resume and a consumer request
flag to optionally ignore pause signals.
* **Metrics**
* Added a scanner pause gauge and pause-duration tracking for WAL
scanning.
* **Tests**
* Added coverage for pause-consumption behavior and cleanup in stream
client tests.
* **Chores**
* Consolidated flush-all logging into a single field and added a helper
for bulk message conversion.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
relate: https://github.com/milvus-io/milvus/issues/42589
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
## New Features
- Added `concurrency_per_cpu_core` configuration parameter for the
analyzer component, enabling customizable per-CPU concurrency tuning
(default: 8).
## Tests
- Added test coverage for batch analysis operations.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Signed-off-by: aoiasd <zhicheng.yue@zilliz.com>
This commit refines L0 compaction to ensure data consistency by properly
setting the delete position boundary for L1 segment selection.
Key Changes:
1. L0 View Trigger Sets latestDeletePos for L1 Selection
2. Filter L0 Segments by Growing Segment Position in policy, not in
views
3. Renamed LevelZeroSegmentsView to LevelZeroCompactionView
4. Renamed fields for semantic clarity: * segments -> l0Segments *
earliestGrowingSegmentPos -> latestDeletePos
5. Update Default Compaction Prioritizer to level
See also: #46434
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
This PR improves the robustness of object storage operations by retrying
both explicit throttling errors (e.g. HTTP 429, SlowDown, ServerBusy).
These errors commonly occur under high concurrency and are typically
recoverable with bounded retries.
issue: https://github.com/milvus-io/milvus/issues/44772
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Configurable retry support for reads from object storage and improved
mapping of transient/rate-limit errors.
* Added a retryable reader wrapper used by CSV/JSON/Parquet/Numpy import
paths.
* **Configuration**
* New parameter to control storage read retry attempts.
* **Tests**
* Expanded unit tests covering error mapping and retry behaviors across
storage backends.
* Standardized mock readers and test initialization to simplify test
setups.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #46443
Add `Forbidden: true` to all tiered storage related parameters to
prevent runtime configuration changes via etcd. These parameters are
marked as refreshable:"false" but that tag was only documentation - the
actual prevention requires the Forbidden field.
Without this fix, if tiered storage parameters are modified at runtime:
- Go side would read the new values dynamically
- C++ caching layer would still use the old values (set at InitQueryNode
time)
- This mismatch could cause resource tracking issues and anomalies
Signed-off-by: Shawn Wang <shawn.wang@zilliz.com>
Related to #46358
Add segment reopen mechanism in QueryCoord to handle segment data
updates when the manifest path changes. This enables QueryNode to reload
segment data without full segment reload, supporting storage v2
incremental updates.
Changes:
- Add ActionTypeReopen action type and LoadScope_Reopen in protobuf
- Track ManifestPath in segment distribution metadata
- Add CheckSegmentDataReady utility to verify segment data matches
target
- Extend getSealedSegmentDiff to detect segments needing reopen
- Create segment reopen tasks when manifest path differs from target
- Block target update until segment data is ready
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
relate:https://github.com/milvus-io/milvus/issues/43687
Support use file resource with sync mode.
Auto download or remove file resource to local when user add or remove
file resource.
Sync file resource to node when find new node session.
---------
Signed-off-by: aoiasd <zhicheng.yue@zilliz.com>
issue: #40513
for querynode which return resource exhausted error, add a penalty
duration on it, and suspend loading new resource until penalty duration
expired.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #45640
- log may be dropped if the underlying file system is busy.
- use async write syncer to avoid the log operation block the milvus
major system.
- remove some log dependency from the until function to avoid
dependency-loop.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
Related #44956
This commit integrates the Storage V2 FFI (Foreign Function Interface)
interface throughout the Milvus codebase, enabling unified storage
access through the Loon FFI layer. This is a significant step towards
standardizing storage operations across different storage versions.
1. Configuration Support
- **configs/milvus.yaml**: Added `useLoonFFI` configuration flag under
`common.storage.file.splitByAvgSize` section
- Allows runtime toggle between traditional binlog readers and new
FFI-based manifest readers
- Default: `false` (maintains backward compatibility)
2. Core FFI Infrastructure
Enhanced Utilities (internal/core/src/storage/loon_ffi/util.cpp/h)
- **ToCStorageConfig()**: Converts Go's `StorageConfig` to C's
`CStorageConfig` struct for FFI calls
- **GetManifest()**: Parses manifest JSON and retrieves latest column
groups using FFI
- Accepts manifest path with `base_path` and `ver` fields
- Calls `get_latest_column_groups()` FFI function
- Returns column group information as string
- Comprehensive error handling for JSON parsing and FFI errors
3. Dependency Updates
- **internal/core/thirdparty/milvus-storage/CMakeLists.txt**:
- Updated milvus-storage version from `0883026` to `302143c`
- Ensures compatibility with latest FFI interfaces
4. Data Coordinator Changes
All compaction task builders now include manifest path in segment
binlogs:
- **compaction_task_clustering.go**: Added `Manifest:
segInfo.GetManifestPath()` to segment binlogs
- **compaction_task_l0.go**: Added manifest path to both L0 segment
selection and compaction plan building
- **compaction_task_mix.go**: Added manifest path to mixed compaction
segment binlogs
- **meta.go**: Updated metadata completion logic:
- `completeClusterCompactionMutation()`: Set `ManifestPath` in new
segment info
- `completeMixCompactionMutation()`: Preserve manifest path in compacted
segments
- `completeSortCompactionMutation()`: Include manifest path in sorted
segments
5. Data Node Compactor Enhancements
All compactors updated to support dual-mode reading (binlog vs
manifest):
6. Flush & Sync Manager Updates
Pack Writer V2 (pack_writer_v2.go)
- **BulkPackWriterV2.Write()**: Extended return signature to include
`manifest string`
- Implementation:
- Generate manifest path: `path.Join(pack.segmentID, "manifest.json")`
- Write packed data using FFI-based writer
- Return manifest path along with binlogs, deltas, and stats
Task Handling (task.go)
- Updated all sync task result handling to accommodate new manifest
return value
- Ensured backward compatibility for callers not using manifest
7. Go Storage Layer Integration
New Interfaces and Implementations
- **record_reader.go**: Interface for unified record reading across
storage versions
- **record_writer.go**: Interface for unified record writing across
storage versions
- **binlog_record_writer.go**: Concrete implementation for traditional
binlog-based writing
Enhanced Schema Support (schema.go, schema_test.go)
- Schema conversion utilities to support FFI-based storage operations
- Ensures proper Arrow schema mapping for V2 storage
Serialization Updates
- **serde.go, serde_events.go, serde_events_v2.go**: Updated to work
with new reader/writer interfaces
- Test files updated to validate dual-mode serialization
8. Storage V2 Packed Format
FFI Common (storagev2/packed/ffi_common.go)
- Common FFI utilities and type conversions for packed storage format
Packed Writer FFI (storagev2/packed/packed_writer_ffi.go)
- FFI-based implementation of packed writer
- Integrates with Loon storage layer for efficient columnar writes
Packed Reader FFI (storagev2/packed/packed_reader_ffi.go)
- Already existed, now complemented by writer implementation
9. Protocol Buffer Updates
data_coord.proto & datapb/data_coord.pb.go
- Added `manifest` field to compaction segment messages
- Enables passing manifest metadata through compaction pipeline
worker.proto & workerpb/worker.pb.go
- Added compaction parameter for `useLoonFFI` flag
- Allows workers to receive FFI configuration from coordinator
10. Parameter Configuration
component_param.go
- Added `UseLoonFFI` parameter to compaction configuration
- Reads from `common.storage.file.useLoonFFI` config path
- Default: `false` for safe rollout
11. Test Updates
- **clustering_compactor_storage_v2_test.go**: Updated signatures to
handle manifest return value
- **mix_compactor_storage_v2_test.go**: Updated test helpers for
manifest support
- **namespace_compactor_test.go**: Adjusted writer calls to expect
manifest
- **pack_writer_v2_test.go**: Validated manifest generation in pack
writing
This integration follows a **dual-mode approach**:
1. **Legacy Path**: Traditional binlog-based reading/writing (when
`useLoonFFI=false` or no manifest)
2. **FFI Path**: Manifest-based reading/writing through Loon FFI (when
`useLoonFFI=true` and manifest exists)
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #44369
woodpecker related[ issue:
#59](https://github.com/zilliztech/woodpecker/issues/59)
Refactor the WAL retention logic in Milvus StreamingNode:
- Remove the simple sampling-based truncation mechanism.
- After flush, WAL data is directly truncated.
- The retention control is now delegated to the underlying message queue
(MQ) implementation.
Signed-off-by: tinswzy <zhenyuan.wei@zilliz.com>
https://github.com/milvus-io/milvus/issues/45544
- Add batch_factor configuration parameter (default: 5) to control
embedding provider batch sizes
- Add disable_func_runtime_check property to bypass function validation
during collection creation
- Add database interceptor support for AddCollectionFunction,
AlterCollectionFunction, and DropCollectionFunction requests
Signed-off-by: junjie.jiang <junjie.jiang@zilliz.com>
issue: #45227
Increase the default session TTL to 30 seconds to tolerate etcd failover
time. This prevents session expiration during etcd cluster failover,
improving system stability.
When etcd undergoes failover (leader election or node restart), the
previous 10s TTL was too short to survive the failover window, causing
unnecessary session expiration and component restarts. The new 30s TTL
provides sufficient buffer for etcd to complete failover while
maintaining session liveness.
Changes:
- Update DefaultSessionTTL constant from 10 to 30
- Update SessionTTL ParamItem DefaultValue from "10" to "30"
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
This PR changes the config layout according to the latest design, and
adds two external credential configs for aws kms
See also: #45169
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
issue: #43897
- Part of collection/index related DDL is implemented by WAL-based DDL
framework now.
- Support following message type in wal, CreateCollection,
DropCollection, CreatePartition, DropPartition, CreateIndex, AlterIndex,
DropIndex.
- Part of collection/index related DDL can be synced by new CDC now.
- Refactor some UT for collection/index DDL.
- Add Tombstone scheduler to manage the tombstone GC for collection or
partition meta.
- Move the vchannel allocation into streaming pchannel manager.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #45150
Removed the maximum limit constraint (value range [1, 10]) for vector
fields in a collection to support more flexible schema design.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
relate: https://github.com/milvus-io/milvus/issues/43687
Add global analyzer options, avoid having to merge some milvus params
into user's analyzer params.
Signed-off-by: aoiasd <zhicheng.yue@zilliz.com>
