1. Modify the binlog reader to stop reading a fixed 4096 rows and
instead use the calculated bufferSize to avoid generating small binlogs.
2. Use a fixed bufferSize (32MB) for the Parquet reader to prevent OOM.
issue: https://github.com/milvus-io/milvus/issues/43387
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #41435
issue: https://github.com/milvus-io/milvus/issues/43038
This PR also:
1. removed ERROR state from ListNode
2. CacheSlot will do reserveMemory once for all requested cells after
updating the state to LOADING, so now we transit a cell to LOADING
before its resource reservation
3. reject resource reservation directly if size >= max_size
---------
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
issue: #42995
- don't balance the wal if the producing-consuming lag is too long.
- don't balance if the rebalance is set as false.
- don't balance if the wal is balanced recently.
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #42995
- The consuming lag at streaming node will be reported to coordinator.
- The consuming lag will trigger the write limit and deny by quota
center.
- Set the ttProtection by default.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
- Introduce dynamic buffer sizing to avoid generating small binlogs
during import
- Refactor import slot calculation based on CPU and memory constraints
- Implement dynamic pool sizing for sync manager and import tasks
according to CPU core count
issue: https://github.com/milvus-io/milvus/issues/43131
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #43040
This patch introduces a disk file writer that supports Direct IO.
Currently, it is exclusively utilized during the QueryNode load process.
Below is its parameters:
1. `common.diskWriteMode`
This parameter controls the write mode of the local disk, which is used
to write temporary data downloaded from remote storage.
Currently, only QueryNode uses 'common.diskWrite*' parameters. Support
for other components will be added in the future.
The options include 'direct' and 'buffered'. The default value is
'buffered'.
2. `common.diskWriteBufferSizeKb`
Disk write buffer size in KB, only used when disk write mode is
'direct', default is 64KB.
Current valid range is [4, 65536]. If the value is not aligned to 4KB,
it will be rounded up to the nearest multiple of 4KB.
3. `common.diskWriteNumThreads`
This parameter controls the number of writer threads used for disk write
operations. The valid range is [0, hardware_concurrency].
It is designed to limit the maximum concurrency of disk write operations
to reduce the impact on disk read performance.
For example, if you want to limit the maximum concurrency of disk write
operations to 1, you can set this parameter to 1.
The default value is 0, which means the caller will perform write
operations directly without using an additional writer thread pool.
In this case, the maximum concurrency of disk write operations is
determined by the caller's thread pool size.
Both parameters can be updated during runtime.
---------
Signed-off-by: Shawn Wang <shawn.wang@zilliz.com>
issue: #41609
- add env `MILVUS_NODE_ID_FOR_TESTING` to set up a node id for milvus
process.
- add env `MILVUS_CONFIG_REFRESH_INTERVAL` to set up the refresh
interval of paramtable.
- Init paramtable when calling `paramtable.Get()`.
- add new multi process framework for integration test.
- change all integration test into multi process.
- merge some test case into one suite to speed up it.
- modify some test, which need to wait for issue #42966, #42685.
- remove the waittssync for delete collection to fix issue: #42989
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #42649
- the sync operation of different pchannel is concurrent now.
- add a option to notify the backlog clear automatically.
- make pulsar walimpls can be recovered from backlog exceed.
Signed-off-by: chyezh <chyezh@outlook.com>
1. Optimize the import process: skip subsequent steps and mark the task
as complete if the number of imported rows is 0.
2. Improve import integration tests:
a. Add a test to verify that autoIDs are not duplicated
b. Add a test for the corner case where all data is deleted
c. Shorten test execution time
3. Enhance import logging:
a. Print imported segment information upon completion
b. Include file name in failure logs
issue: https://github.com/milvus-io/milvus/issues/42488,
https://github.com/milvus-io/milvus/issues/42518
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #42165
Implement dynamic task execution capacity calculation based on QueryNode
CPU core count instead of static configuration for better resource
utilization.
Changes include:
- Add CpuCoreNum() method and WithCpuCoreNum() option to NodeInfo
- Implement GetTaskExecutionCap() for dynamic capacity calculation
- Add QueryNodeTaskParallelismFactor parameter for tuning
- Update proto definition to include cpu_core_num field
- Add unit tests for new functionality
This allows QueryCoord to automatically adjust task parallelism based on
actual hardware resources.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #42028
- limit the concurrency of zstd compression.
- zstd.go modified from
`github.com/apache/arrow/go/v17/parquet/compress/ztsd.go`
- may be related to #42129
Signed-off-by: chyezh <chyezh@outlook.com>
Increase insert buffer size from 16MB to 64MB, while keeping delete
buffer size at 16MB.
issue: https://github.com/milvus-io/milvus/issues/42518
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #42498
- fix: sealed segment cannot be flushed after upgrading
- fix: get mvcc panic when upgrading
- ignore the L0 segment when graceful stop of querynode.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
Remove the unlimited logID mechanism and switch to redundantly
allocating a large number of IDs.
issue: https://github.com/milvus-io/milvus/issues/42518
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #42162
- enhance: add read ahead buffer size issue #42129
- fix: rocksmq consumer's close operation may get stucked
- fix: growing segment from old arch is not flushed after upgrading
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: https://github.com/milvus-io/milvus/issues/41690
This commit implements partial search result functionality when query
nodes go down, improving system availability during node failures. The
changes include:
- Enhanced load balancing in proxy (lb_policy.go) to handle node
failures with retry support
- Added partial search result capability in querynode delegator and
distribution logic
- Implemented tests for various partial result scenarios when nodes go
down
- Added metrics to track partial search results in querynode_metrics.go
- Updated parameter configuration to support partial result required
data ratio
- Replaced old partial_search_test.go with more comprehensive
partial_result_on_node_down_test.go
- Updated proto definitions and improved retry logic
These changes improve query resilience by returning partial results to
users when some query nodes are unavailable, ensuring that queries don't
completely fail when a portion of data remains accessible.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Related to #40756
Large nq will naturally increase query time, which causing lots of slow
log when user NQ numbers are very large.
This PR make slow search counts span per nq (using avg val) to decide
whether one request is slow or not.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
