relate:https://github.com/milvus-io/milvus/issues/43687
Support use file resource with sync mode.
Auto download or remove file resource to local when user add or remove
file resource.
Sync file resource to node when find new node session.
---------
Signed-off-by: aoiasd <zhicheng.yue@zilliz.com>
issue: #45865
- Modified leader_checker.go to include all nodes (RO + RW) instead of
only RW nodes, preventing channel balance from stucking on RO nodes
- Added debug logging in segment_checker.go when no shard leader found
- Enhanced target_observer.go with detailed logging for delegator check
failures to improve debugging visibility
- Fixed integration tests:
- Temporarily disabled partial result counter assertion in
partial_result_on_node_down_test.go pending concurrent issue fix
- Increased transfer channel timeout from 10s to 20s in
manual_rolling_upgrade_test.go to avoid flaky test caused by target
update interval (10s)
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #43897
- Return LastConfirmedMessageID when wal append operation.
- Add resource-key-based locker for broadcast-ack operation to protect
the coord state when executing ddl.
- Resource-key-based locker is held until the broadcast operation is
acked.
- ResourceKey support shared and exclusive lock.
- Add FastAck execute ack right away after the broadcast done to speed
up ddl.
- Ack callback will support broadcast message result now.
- Add tombstone for broadcaster to avoid to repeatedly commit DDL and
ABA issue.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #44014
- Because the session of querynode and streamingnode is different.
- So when streamingnode session down first, a streaming query node will
be treated as querynode.
- Use label but not streaming node session to fix it.
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #42860
Fix channel node allocation when QueryNode count is not a multiple of
channel count. The previous algorithm used simple division which caused
uneven distribution with remainders.
Key improvements:
- Implement smart remainder distribution algorithm
- Refactor large function into focused helper functions
- Support two-phase rebalancing (release then allocate)
- Handle edge cases like insufficient nodes gracefully
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #42098
Fix concurrent access issue by adding proper locking around
ReleasePartition operation to prevent race conditions when releasing
partitions on the same collection.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #42098#42404
related to: ##42009 #41937
Implement new method to handle partition removal from next target
without directly modifying current target.
Changes include:
- Add RemovePartitionFromNextTarget method and deprecate RemovePartition
- Update target_observer to use new method for ReleasePartition
operations
- Add unit tests and mock methods for new functionality
This ensures that all changes to next target will propagates to
delegator's query view.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: https://github.com/milvus-io/milvus/issues/41690
This commit implements partial search result functionality when query
nodes go down, improving system availability during node failures. The
changes include:
- Enhanced load balancing in proxy (lb_policy.go) to handle node
failures with retry support
- Added partial search result capability in querynode delegator and
distribution logic
- Implemented tests for various partial result scenarios when nodes go
down
- Added metrics to track partial search results in querynode_metrics.go
- Updated parameter configuration to support partial result required
data ratio
- Replaced old partial_search_test.go with more comprehensive
partial_result_on_node_down_test.go
- Updated proto definitions and improved retry logic
These changes improve query resilience by returning partial results to
users when some query nodes are unavailable, ensuring that queries don't
completely fail when a portion of data remains accessible.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: https://github.com/milvus-io/milvus/issues/41690
- Merge leader view and channel management into ChannelDistManager,
allowing a channel to have multiple delegators.
- Improve shard leader switching to ensure a single replica only has one
shard leader per channel. The shard leader handles all resource loading
and query requests.
- Refine the serviceable mechanism: after QC completes loading, sync the
query view to the delegator. The delegator then determines its
serviceable status based on the query view.
- When a delegator encounters forwarding query or deletion failures,
mark the corresponding segment as offline and transition it to an
unserviceable state.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #40292
related to #39552
- Fix incorrect delete checkpoint usage in SyncDistribution
- Change checkpoint parameter from action.GetCheckpoint() to
action.GetDeleteCP() in SyncTargetVersion call
- This resolves the issue where delete buffer data was being cleaned
prematurely due to wrong checkpoint reference
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #39551
This PR remove querycoord's scheduling of l0 segments:
- only load l0 segment when watch channel
- only release l0 segment when release channel or sync data distribution
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Related to #39840
The target could be updated async in previous code. This PR make remove
collection from target observer block until all tasks related in
dispatchers are removed preventing the metrics being updated after
collection released.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #39680
if compaction/gc happens, load collection may stuck due to
SegmentNotFound, we should trigger UpdateNextTarget to get a new data
view to execute loading operation.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #38399
- Add a pchannel level checkpoint for flush processing
- Refactor the recovery of flushers of wal
- make a shared wal scanner first, then make multi datasyncservice on it
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #38399
- Embed the query node into streaming node to make delegator available
at streaming node.
- The embedded query node has a special server label
`QUERYNODE_STREAMING-EMBEDDED`.
- Change the balance strategy to make the channel assigned to streaming
node as much as possible.
Signed-off-by: chyezh <chyezh@outlook.com>
1. Provide partition&channel level indexing in the collection target.
2. Make `SegmentAction` not wait for distribution.
3. Remove scheduler and target manager mutex.
4. Optimize logging to reduce CPU overhead.
issue: https://github.com/milvus-io/milvus/issues/37630
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
1. A collection should observe the channel only once.
2. A collection should check the CollectionLoadPercent for updates only
once.
3. Skip saving coll/partition meta if there are no changes, primarily to
accelerate collection observation after recovery.
issue: https://github.com/milvus-io/milvus/issues/37630
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #35917
This PR refine the querycoord meta related interfaces to ensure that
each method includes a ctx parameter.
Signed-off-by: tinswzy <zhenyuan.wei@zilliz.com>
issue: #37679
pr #36549 introduce the logic error which update current target when
only parts of channel is ready.
This PR fix the logic error and let dist handler keep pull distribution
on querynode until all delegator becomes serviceable.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #37640
fix the pr #36549
cause balance channel will wait until new delegator becomes serviceable,
but new delegator need to sync target version then becomes serviceable,
and sync target version need to be wait all replica load done. so if
increasing replica number and balance channel happens at same time,
logic dead lock occurs.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #36293#36242
after qn recover, delegator may be loaded in new node, after all segment
has been loaded, delegator becomes serviceable. but delegator's target
version hasn't been synced, and if search/query comes, delegator will
use wrong target version to filter out a empty segment list, which
caused empty search result.
This pr will block delegator's serviceable status until target version
is synced
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
When there're a lot of loaded collections, they would occupy the target
observer scheduler’s pool. This prevents loading collections from
updating the current target in time, slowing down the load process.
This PR adds a separate target dispatcher for loading collections.
issue: https://github.com/milvus-io/milvus/issues/37166
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #36977
with node_label_filter on resource group, user can add label on
querynode with env `MILVUS_COMPONENT_LABEL`, then resource group will
prefer to accept node which match it's node_label_filter.
then querynode's can't be group by labels, and put querynodes with same
label to same resource groups.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #33550
cause concurrent issue may occur between remove parition in target
manager and sync segment list to delegator. when it happens, some
segment may be released in delegator, and those segment may also be
synced to delegator, which cause delegator become unserviceable due to
lack of necessary segments, then search/query fails.
this PR make sure that all write access to target_manager will be
executed in serial to avoid the concurrent issues.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #34234
`LoadPartitions` does not guarantee the current target has loading
partitions if there are some partitions already loaded before.
This PR check current target contains the partition to load when
advancing loading percentage to 100.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #33103
when try to do stopping balance for stopping query node, balancer will
try to get node list from replica.GetNodes, then check whether node is
stopping, if so, stopping balance will be triggered for this replica.
after the replica refactor, replica.GetNodes only return rwNodes, and
the stopping node maintains in roNodes, so balancer couldn't find
replica which contains stopping node, and stopping balance for replica
won't be triggered, then query node will stuck forever due to
segment/channel doesn't move out.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
